- 500g真空磁悬浮熔炼炉英文配置表
详细信息
品牌:酷斯特 型号:K-ZGF-0.5 加工定制:是 产品别名:真空悬浮炉 产品用途:用来制取高熔点、高纯度和极活泼
真空磁悬浮熔炼方法,是近些年来飞速发展的一种熔炼方法,主要用来制取高熔点、高纯度和极活泼的金属,在冶金和高尖端材料制备等许多重要领域得到了广泛的应用,显示出良好的应用前景。
二、设备特点
1·真空磁悬浮熔炼,料与坩埚无接触冶炼,干净无污染。
2·冶炼温度高,*高温度可达2500甚至以上,专门应用于高熔点难熔金属,活泼金属等冶炼提纯。
3·采用磁悬浮专用IGBT电源,配合自助研发的水冷分瓣铜坩埚,悬浮效果好。
4·采用两级分子泵控制系统真空度高,*高可达5.0*10-5pa。
真空磁悬浮熔炼炉参数:- 250g真空磁悬浮熔炼炉主要技术参数
- 额定功率:65Kw
- 容量(以铁计):0.5Kg
- 输入电源:3 相、 380 ± 10 %、 50Hz
- 冷态极限真空度:6.67×10E-4Pa
10.1出厂安装调试实现一条龙服务;安装好后客户可直接使用。
10.2设备出厂安装调试验收后质量保修期为12个月份,终身维修,一年后收取适当费用。
10.3服务期内如用户有报修通知,3 小时内电话指导,如电话指导用户不能自选排除即在2个工作日内安排人员上门服务。
I. 250g Vacuum Maglev Melting Furnace Small Maglev Melting Furnace Micro Maglev Melting Furnace Equipment Uses
Vacuum magnetic levitation smelting is a rapidly developing smelting method in recent years. It is mainly used to produce high melting point, high purity and very active metals. It has been widely used in many important fields such as metallurgy and preparation of high-end materials, showing good application prospects.
II. Equipment Characteristics
1. Vacuum magnetic levitation smelting, material and crucible non-contact smelting, clean and pollution-free.
2. Smelting temperature is high, the highest temperature can reach 2500 or more. It is specially used for smelting and purifying refractory metals with high melting point and active metals.
3. The special IGBT power supply for magnetic suspension and self-developed water-cooled split copper crucible have good suspension effect.
4. The two-stage molecular pump control system has high vacuum, up to 5.0*10-5 PA.
Vacuum Maglev Furnace Parameters:
Main Technical Parameters of 250g Vacuum Maglev Furnace
Rated power: 65Kw
Capacity (in iron): 0.5Kg
Input power supply: 3-phase, 380+10%, 50Hz
Cold limit vacuum: 6.67 *10E-4Pa
IV. Quality Assurance
10.1 Out-of-factory installation and commissioning to achieve one-stop service; after installation, customers can use it directly.
10.2 The quality guarantee period is 12 months after the acceptance of equipment installation, commissioning and acceptance, and life-long maintenance. Appropriate fees will be charged one year later.
10.3 During the service period, if the user has a notice of repairs, telephone guidance within 3 hours, if the telephone guidance user can not choose to exclude, that is to arrange for staff to visit the service within 2 working days.
-