酷斯特仪器真空熔炼炉英文配置表

一·酷斯特仪器精品款真空熔炼炉实验室用真空熔炼炉参数参数设备用途
 本设备是金属合金制备的专用设备，主要供大专院校及科研单位等在真空或保护气氛条件下对金属材料（如不锈钢、镍基合金、铜、合金钢、镍钴合金、稀土钕铁錋等）的熔炼处理，也可进行合金钢的真空精炼处理及精密铸造。本设备采用温控仪表控制电源加热，测温采用铂铑热电偶，温度更加精确，更加节能。
 
二·酷斯特仪器精品款真空熔炼炉KZG-0.5实验室用真空熔炼炉参数产品特点
1·熔化速度快，加装保温套温度可达到2100℃及以上
2·可选配程序升温控温，根据您的工艺要求设定好升温或者降温曲线，设备会自动按照此工艺进行加热或降温
3· 带熔炼浇铸装置，
3· 可在多种气氛条件下熔炼：空气、保护气氛、高真空条件下熔炼，
4· 可选配二次加料系统，可实现在熔化过程中加入其他元素，方便您制备出多元化样品
5· 全不锈钢结构，并带水冷，保证外壳温度低于35℃
 三·酷斯特仪器精品款真空熔炼炉实验室用真空熔炼炉参数​​​​​​​设备参数
1、设备型号：KZG-10.5
2· 坩埚容量：500g
3· 冷态极限真空度：6.67×10E-3Pa(机械泵+扩散泵）6.67×10E-4Pa(机械泵+分子泵）
4、压升率：2帕/h
5· 设备总功率：20Kw；电源电压：3相380V,50Hz
6`、熔样规格：50g 200g 500g可选配喷铸铸造功能
7· 外形尺寸：1250×1150×1500mm(L×W×H)
8· 设备总重量：400Kg
I. Utilization of Parameter Equipment of Vacuum Melting Furnace for Laboratory Use of Quintessence Vacuum Melting Furnace
This equipment is a special equipment for the preparation of metal alloys. It is mainly used for the smelting of metal materials (such as stainless steel, nickel-based alloy, copper, alloy steel, nickel-cobalt alloy, rare earth neodymium iron liniment, etc.) under vacuum or protective atmosphere. It can also be used for vacuum refining and precision casting of alloy steel. 。 This equipment uses temperature control instrument to control power supply heating, and uses platinum rhodium thermocouple to measure temperature. The temperature is more accurate and energy-saving.
 
2. Features of KZG-0.5 Vacuum Melting Furnace Parameter Products for Laboratory
1. Melting speed is fast and the temperature of insulating sleeve can reach 2100 C or above.
2. Optional temperature control program, according to your process requirements set the temperature rise or cooling curve, the equipment will automatically according to this process for heating or cooling.
3. Casting equipment with smelting.
3. It can be smelted in a variety of atmospheres: air, protective atmosphere and high vacuum.
4. Optional secondary feeding system can add other elements to the melting process to facilitate the preparation of diversified samples.
5. All stainless steel structure, with water cooling, to ensure that the shell temperature is below 35 C.
3. Vacuum Furnace Parameters for Laboratory Vacuum Furnace of Quintessential Instruments
1. Equipment type: KZG-10.5
2. Crucible capacity: 500g
3. Cold limit vacuum: 6.67 *10E-3Pa (mechanical pump + diffusion pump) 6.67 *10E-4Pa (mechanical pump + molecular pump)
4. Pressure rise rate: 2 Pa/h
5. Equipment total power: 20Kw; Power supply voltage: 3-phase 380V, 50Hz
6 `Melt Sample Specification: 50g 200g 500g Optional Spray Casting Function
7. Shape size: 1250 *1150 *1500mm (L *W *H)
8. Total weight of equipment: 400Kg